FreeBSD Agent

This section covers the following topics:

• Install the Node Agent
  • Verify Checksum for Node Agent Package File
• Configure the Node Agent
• Restart the Node Agent
• Uninstall the Node Agent
• Upgrade the Node Agent

Install the Node Agent

1. Log into the ER2 Web Console.
2. Go to Settings > Agents > Node Agent Downloads.
3. On the Node Agent Downloads page, click on the Filename for your Platform.
4. (Optional) Verify the checksum of the downloaded Node Agent package file.

In the terminal:

1. If there is a previous version of the Node Agent installed, remove it first:

   # Retrieves the name of the installed Node Agent. pkg info|grep er2
# Deletes the installed agent, <package name> pkg delete er2

2. Install the Node Agent:

   # Where './er2-2.x.xx-freebsd10-x.tbz' is the full path of the installation package # Syntax: pkg install <path_to_package.tbz> pkg install ./er2-2.x.xx-freebsd10-x.tbz

Verify Checksum for Node Agent Package File

You can determine the integrity of the downloaded Node Agent package file by verifying the checksum before installing the Node Agent.

1. Download the Node Agent package file.
2. Run the commands in a terminal to generate the hash value for the Node Agent package file.

   • MD5 hash (128-bit)

     # Syntax: md5 <path to Node Agent package file> md5 ./er2-2.x.xx-freebsd10-x.tbz
     Example MD5 hash: f65a2cd26570ddb7efb6a2a4318388ac

   • SHA1 hash (160-bit)

     # Syntax: sha1 <path to Node Agent package file> sha1 ./er2-2.x.xx-freebsd10-x.tbz
     Example SHA1 hash: 33bcd6678580ae38a03183e94b4038e72b8f18f4

   • SHA256 hash (256-bit)

     # Syntax: sha256 <path to Node Agent package file> sha256 ./er2-2.x.xx-freebsd10-x.tbz
     Example SHA256 hash: 1ee094a222f7d9bae9015ab2c4ea37df71000556b3acd2632ee27013844c49da

3. In the ER2 Web Console, go to the Settings > Agents > Node Agent Downloads page. The Hash column lists the expected hash values for each Node Agent package file.

4. Compare the generated hash values from Step 2 with the expected hash values listed in the Web Console; both hash values should be equal.

   If the hash values do not match, check that your network connection is stable, download the Node Agent package again from the Web Console, and verify the checksums again. If the issue still persists, contact Ground Labs Technical Support.

Configure the Node Agent

After you have installed the Node Agent, configure the Node Agent to:

1. Point to the Master Server.
2. (Optional) Use the Master Public Key (see Server Information) when connecting to the Master Server.
3. (Optional) Specify Target initial group.
4. Test the connection settings.

To configure the Node Agent, choose either mode:

• Interactive Mode
• Manual Mode

For the changes to take effect, you must Restart the Node Agent.

Interactive Mode

Running this command helps you to quickly configure the Node Agent:

er2-config -interactive

The interactive mode asks you for the following information to help you configure the Node Agent.

For the changes to take effect, you must Restart the Node Agent.

Manual Mode

To configure the Node Agent without interactive mode, run:

## Required for connecting to the Master Server # -i <hostname|ip_address>: Master Server IP address or host name. ## Optional parameters # -t: Tests if the Node Agent can connect to the given host name or IP address. # -k <master_public_key>: Sets the Master Public Key. # -g <target_group>: Sets the default Target Group for scan locations added for this Agent.
er2-config -i <hostname|ip_address> [-t] [-k <master_public_key>] [-g <target_group>]

For the changes to take effect, you must Restart the Node Agent.

Restart the Node Agent

For your configuration settings to take effect, you must restart the Node Agent:

## Run either of these options # Option 1 er2-agent -stop # stops the agent er2-agent -start # starts the agent
# Option 2 /etc/rc.d/er2_agent restart

Uninstall the Node Agent

To uninstall the Node Agent, run the following commands:

# Retrieve the name of the installed Node Agent pkg info | grep er2
# Delete the installed agent, <package name> pkg delete er2

Upgrade the Node Agent

See Agent Upgrade for more information.