HP-UX Agent

This section covers the following topics:

• Install the Node Agent
  • Verify Checksum for Node Agent Package File
• Configure the Node Agent
• Install Node Agent Package in Custom Location
• Restart the Node Agent
• Uninstall the Node Agent
• Upgrade the Node Agent

Install the Node Agent

1. Log into the Web Console.
2. Expand the navigation menu, ENTERPRISE RECON . Go to DOWNLOADS > NODE AGENT DOWNLOADS.
3. On the Node Agent Downloads page, click on the Filename for your Platform.
4. (Optional) Verify the checksum of the downloaded Node Agent package file.

In the terminal:

1. If there is a previous version of the Node Agent installed, remove it first:

   swremove ER2Agent

2. Install the Node Agent:

   # Where '/er2-2.0.xx-hpux11-ia64.depot' is the full path of the installation package # Syntax: swinstall -s /<path_to_package.depot> <software_selection> swinstall -s /er2-2.0.xx-hpux11-ia64.depot ER2Agent

Verify Checksum for Node Agent Package File

Requires: OpenSSL package.

You can determine the integrity of the downloaded Node Agent package file by verifying the checksum before installing the Node Agent.

1. Download the Node Agent package file.
2. Run the commands in a terminal to generate the hash value for the Node Agent package file.

   • MD5 hash (128-bit)

     # Syntax: openssl md5 <path to Node Agent package file> openssl md5 er2-2.0.xx-hpux11-ia64.depot
     Example MD5 hash: f65a2cd26570ddb7efb6a2a4318388ac

   • SHA1 hash (160-bit)

     # Syntax: openssl sha1 <path to Node Agent package file> openssl sha1 er2-2.0.xx-hpux11-ia64.depot
     Example SHA1 hash: 33bcd6678580ae38a03183e94b4038e72b8f18f4

   • SHA256 hash (256-bit)

     # Syntax: openssl sha256 <path to Node Agent package file> openssl sha256 er2-2.0.xx-hpux11-ia64.depot
     Example SHA256 hash: 1ee094a222f7d9bae9015ab2c4ea37df71000556b3acd2632ee27013844c49da

3. In the Web Console, go to the DOWNLOADS > NODE AGENT DOWNLOADS page. The Hash column lists the expected hash values for each Node Agent package file.

4. Compare the generated hash values from Step 2 with the expected hash values listed in the Web Console; both hash values should be equal.

   If the hash values do not match, check that your network connection is stable, download the Node Agent package again from the Web Console, and verify the checksums again. If the issue still persists, contact Ground Labs Technical Support.

Configure the Node Agent

After you have installed the Node Agent, configure the Node Agent to:

1. Point to the Master Server.
2. (Optional) Use the Master Public Key (see Server Information) when connecting to the Master Server.
3. (Optional) Specify Target initial group.
4. Test the connection settings.

To configure the Node Agent, choose either mode:

• Interactive Mode
• Manual Mode

For the changes to take effect, you must Restart the Node Agent.

Interactive Mode

Running this command helps you to quickly configure the Node Agent:

er2-config -interactive

The interactive mode asks you for the following information to help you configure the Node Agent.

For the changes to take effect, you must Restart the Node Agent.

Manual Mode

To configure the Node Agent without interactive mode, run:

## Required for connecting to the Master Server # -i <hostname|ip_address>: Master Server IP address or host name. ## Optional parameters # -t: Tests if the Node Agent can connect to the given host name or IP address. # -k <master_public_key>: Sets the Master Public Key. # -g <target_group>: Sets the default Target Group for scan locations added for this Agent.
er2-config -i <hostname|ip_address> [-t] [-k <master_public_key>] [-g <target_group>]

For the changes to take effect, you must Restart the Node Agent.

Install Node Agent Package in Custom Location

To install the Node Agent package in a custom location:

1. Download the Node Agent from the Master Server. The Master Server must be version 2.0.29 and above.

2. Install the package in a custom location.

   # Syntax: swinstall -s /<path_to_package.depot> <software_selection> @<absolute_path_for_custom_location> # Install the Node Agent package '/er2-2.0.xx-hpux11-ia64.depot' into the custom location at '/custompath'.
swinstall -s /er2-2.0.xx-hpux11-ia64.depot ER2Agent @/custompath

3. Configure the package:

   # Configure the Node Agent package. # Run 'er2-config' binary from the custom install location, i.e. '<absolute_path_for_custom_location>/usr/sbin/er2-config' # Specify the location of the configuration file. The location of the configuration file is '<absolute_path_for_custom_location>/var/lib/er2/agent.cfg '
/custompath/usr/sbin/er2-config -c /custompath/var/lib/er2/agent.cfg -interactive

4. Restart the Node Agent.

Restart the Node Agent

For your configuration settings to take effect, you must restart the Node Agent.

For Node Agent packages installed in the default or custom location:

## Run either of these options # Option 1 /sbin/init.d/er2-agent restart
# Option 2 /sbin/init.d/er2-agent stop # stops the agent /sbin/init.d/er2-agent start # starts the agent

Uninstall the Node Agent

To uninstall the Node Agent, run:

swremove ER2Agent

Upgrade the Node Agent

See Agent Upgrade for more information.